4th Generation True Modular UPS
10kW – 3.6MW
Taking power availability to the next level…
CumulusPower™ is a Swiss-made Three-Phase, 4th Generation Modular UPS system which offers industry leading “9 nines” availability and lowest total cost of ownership.
Comprised of power modules of either 10, 20, 25, 50 or 60 kW, which can be accommodated in single racks with total power ranging from 20KW to 300kW. In addition, the largest power Rack CP600 can be extended to 3.6 MW by horizontally paralleling multiple racks. The CumulusPower™ range is designed to protect small and mid-sized Datacenters as well as other mission critical applications.
The advanced CumulusPower™ technology combines a unique Intelligent Module Technology (IMT), with a fault-tolerant parallel architecture, called Distributed Active-Redundant Architecture (DARA), thereby fulﬁlling the highest availability and reliability requirements.
Industry leading VFI 97% efficiency
No single point of failure
Outstanding overload capability
124% continuous operation in overload
Minimized total cost of ownership
Ultra-safe Eco mode
99.4% efficiency in Eco mode operation
Protect your critical application, minimise human error.
Availability to the next level 99.9999999% (9 nines)
The higher the Availability, the lower the downtime. By eliminating any single point of failure, adding active-redundant technology, preventing human error and reducing the time to maintain and repair, CumulusPower™ delivers an industry leading Availability of 9 nines to fulfil the needs of the most critical power applications. CumulusPower™, true modular UPS, takes downtime from seconds to the milliseconds level. Availability is formally defined as
CumulusPower™ maximizes the Mean Time Between Failure (MTBF) while minimizes the Mean Time To Repair with a series of future.
Parallel system availability increases with the reduction of the Mean Time To Repair (MTTR). In-frame per-module bypass fuses minimise the time it takes to re-establish a system in an event fault.
Triple-mode parallel bus
Multi-frame connection is one of the advantages of horizontal scalability. Communication between frames and modules is critical, nevertheless, for some architectures, it is still a single point of failure. CumulusPower™ parallel communication is provided with a unique triple-mode parallel bus, that consists of three independent communication lines and three independent electronic circuits. With triple redundancy in the communication lines and electronic circuits the risk of disconnection or short-circuit on any of the communication lines is mitigated eliminating the single point of failure.
Full Bypass redundancy
Some UPS architectures still use centralised critical components like a Single Bypass Architecture (SBA). Centralised components in a parallel system represent single points of failure. Unlike the centralised architectures, Centiel’s modular UPS, CumulusPower™, is equipped with a Distributed Bypass Architecture (DBA), that brings full redundancy even in the bypass line, avoiding any system’ single point of failure.
Safe Smart Battery test
CumulusPower™ battery tests are programmable and safe. Smart Battery Booster architecture allows the UPS to perform battery monitoring, tests and health status diagnosis without the need for mains disconnection.
Hot-Swappable with minimised human error
CumulusPower™ modules can be swapped without the need to switch over the load to bypass. Individual module parallel isolators disconnect from the system, minimising human error and increasing Availability.
Flexibility: Same core technology different solutions
CumulusPower™ fits in a 19” (IM10/20) to provide the maximum flexibility to the final application. Centiel’s flexible solution approach can customize a frame solution to satisfy specific needs.”
1. Reduced up-front investment
Compared to a standalone UPS solutions or centralised bypass architectures, Centiel’s scalable modular UPS have a lower total up-front investment cost, allowing you to grow your power protection capacity as your demand increases.
2. Avoid oversized diesel generators
In the event of a mains failure our Unity Power Factor and Smart-Battery-Booster ensure that every switch over happens smoothly, minimising in-rush current, avoiding generator destabilisation and eliminating the need for generator oversizing.
3. Eliminate ad-on external components
Back-feed protection in every module and maintenance bypass, bypass fuses and battery DC breakers within the UPS frame eliminate the need for external components connections, reducing Total Cost of Ownership.
4. Save on batteries
Batteries represent a substantial part of a project cost structure. With CumulusPower™ you have the flexibility to select the number and type of battery blocks that best suit your application. Letting you decide on a case by case basis the best way to optimise total system cost.
5. High efficiency means less heat
CumulusPower™ industry-leading VFI 97% efficiency and its flat efficiency curve, contribute to low energy losses and heat dissipation, reducing the size and cost of cooling systems.
6. High battery charging current capability
The innovative modular design of CumulusPower allows a higher charge current capability whilst protecting the batteries at all times. This allows for faster, safer charging.
Total cost of ownership
Maximum Efficiency Management (MEM)
Use energy only when it is needed. Cumuluspower™ incorporates a user enabled intelligent MEM that only uses as many modules as necessary to match the load demand. MEM constantly looks for the optimal energy efficiency point. If the load demand decreases, MEM calculates that a reduced number of modules could support the load whilst still maintaining redundancy. The surplus modules enter an “active-sleep” mode to optimise the overall energy consumption. If the load increases, and additional modules are required to support the higher load, “active-sleep” modules are instantaneously reactivated to support the load.
Optimise valuable space (Minimized Footprint)
With only 0.29m² for 10/20 kW and 0.44m² for 30/40/60 kW, the PremiumTower ™ optimises valuable floor space, eliminates the cost of an additional battery cabinet, and simplifies the installation.
Provide industry-leading availability
The higher the Availability, the shorter the downtime. Eliminating single points of failure, adding active-redundant technology, helping to prevent human error and reducing the time to maintain and repair allows Cumuluspower™ to deliver an industry leading Availability of 9 nines to fulfill the needs of the most critical power applications. Cumuluspower™ reduces downtime from seconds to the milliseconds.
Availability is formally defined as
The advanced Cumuluspower™ design maximises the Mean Time Between Failure (MTBF) whilst minimising the Mean Time To Repair.
Minimised life-time maintenance cost
Preventative maintenance is important to maximize availability. Centiel develop products to reduce the time and costs associated with preventative maintenance and minimise the number of components that require routine replacement. The innovative design of CumulusPower also simplifies these replacements, reducing the time and cost involved.
Provide outstanding overload capability (Outstanding Overload Capability)
With continuous operation at 124% overload, mission critical applications will be safe in the event of unexpected load demands.
Reduce your energy bill
High efficiency means less heat dissipation, and therefore less energy wasted. Cumuluspower™ reduces the energy consumption of the power protection equipment and the associated cooling systems.
Use energy only when
it is needed with CumulusPower™
Keeping a healthy UPS should be safe and easy: Serviceability
State of the art service tools
CumulusPower™ service tools allow technicians, to connect, download events, verify configuration and change parameters of the UPS with a simple tap of the screen. The mobile and tablet app provides a full toolbox to read and interpret the health of the system.
Safe power-upgrades: Reduce human error
Power capacity upgrades and module substitution are two critical operations where human error can compromise the system load. To eliminate this risk every module in a CumulusPower™ frame can be fully isolated from the parallel system, thanks to the parallel isolator. This isolator allows technicians to perform a full module test and parameters configuration in a running system without the need for load disconnection or for your system to switch to bypass. This feature eliminates the possibility of connecting a faulty module to the parallel system which could compromise the connected load.
Back-feed protection: Increased safety and reduced system cost
Embedded into the module as standard is back-feed protection which increases service personnel safety, reduces total system cost and avoids external components.
Per-module 3” graphical user interface
With CumulusPower™ graphical user interface it is easy to read measurements, parameters, messages, alarm and any parameter of the UPS.
Thanks to our extensive failure analysis research and insights gathered from 25 years of ﬁeld experience working with a large number of data centres and other critical environments, our power protection solutions have reached the highest levels of availability to reduce downtime risk, avoid costly errors, and increase energy eﬃciency. To respond to highest availability requirements i.e. to eliminate risks that may cause computer downtime of business-critical applications, CENTIEL has developed a new series of fault-tolerant, Three-phase, modular UPS-systems called Cumuluspower™ (CP). Unlike traditional centralised parallel multi-module systems, the advanced CumulusPower™ technology combines a unique Intelligent Module Technology (IMT), with a fault-tolerant parallel architecture, called Distributed Active-Redundant Architecture (DARA), thereby fulﬁlling the highest availability and reliability requirements.
Distributed Active-Redundant Architecture (DARA)
The Distributed Active-Redundant Architecture of the CumulusPower™ product line is designed to respond to the highest availability requirements, through the implementation of the “democratic” majority load transfer decision-making in the event of a critical failure, and correct management of the load sharing to avoid crosscurrents between modules. The communication between the logic circuits of the modules is accomplished by means of a fault-tolerant dual communication BUS.
In the event of a critical failure, every module will decide, by means of its logic circuit, whether the load should remain on the inverter or be transferred to the bypass. The load transfer will be conducted depending on the decision made by the majority of the modules. In order to avoid crosscurrents between the modules, a master-slave load sharing technique is adopted. The ﬁrst module becomes the master which provides the load value to be shared by the rest of the modules (slaves). If the master fails, the next module will automatically become the leading master.
Intelligent Module Technology (IMT)
The CumulusPower™ modules are equipped with all hardware (power circuits) and all software (intelligence and monitoring) functions, making them fully independent and capable of safely isolating from the multi-module system whenever an internal fault occurs.
If that should happen, the remaining modules will continue to provide protected power to the critical load without interruption. The integration of hardware and software in each module enables the elimination of all single points of failure which could compromise the power of the critical application.
The core technology of the CumulusPower™ product family is based in 3 Intelligent Modules sizes that can be combined to create systems from 10kVA/kW to 3MW
DARA Modular Architecture
– Mains Bypass Line
– Mains Rectifier Line
– Data communications
– DC Batteries
– AC Output Line
Unity Power Factor (kVA = kW)
CumulusPower™ provides unity power factor output which avoids the need for system oversizing.
High Efficiency 97% (VFI)
With a best in class efficiency of 97% in double conversion mode (VFI), CumulusPower™ provides the lowest Total Cost of Ownership.
Outstanding overload capability
With a 124% continuous operation in overload condition, mission critical applications will be safe in the event of unexpected load demands.
Exceptional short circuit capability
With a Short Circuit Capability of 3 times nominal current (3 x In), PremiumTower™ is able to clear output circuit protection in milliseconds.
tolerant three-phase UPS
From the designers of the 1st three-phase
transformerless UPS and the 1st, 2nd
and 3rd generation modular UPS,
comes the 4th generation.
CumulusPower™ fault tolerant three-phase UPS
From the designers of the 1st three-phase transformerless UPS and the
1st, 2nd and 3rd generation modular UPS, comes the 4th generation.
|10 kVA/kW||20 kVA/kW||25 kVA/kW|
|50 kVA/kW||60 kVA/kW|