Select Page

MSIII

On-Line Double Conversion Technology.
Single Phase in – Single  Phase out. 6kVA and 10kVA.

MSIII

On-Line Double Conversion Technology. 
Single Phase in – Single  Phase out. 6kVA and 10kVA.

On-Line Double Conversion Technology.
 Single Phase in – Single  Phase out. 6kVA and 10kVA.
  • On-line double conversion technology
  • Parallel redundant operation up to 4 units
  • Input Power Factor Correction PFC High output power factor (PF:0.9)
  • Low total harmonic distortion (THD) level
  • Transformerless Design Configurable as a 45/70Hz Frequency Converter from the LCD Panel
  • High Performance with PWM Sinewave Topology
  • Cold Start Function
  • Intelligent Battery Management System extends the life time of batteries
  • Overload, Overheat & Short Circuit Protection
  • User Friendly, Multi-Functional LED/LCD Display
  • Panel Energy Saving Mode (ECOMODE)
  • Smart Fan Speed Regulation with temperature control
  • RS232 Communication Port & Management Software
  • Internal SNMP, RELAY contact

General Characteristics

The true online architecture continuously supplies your critical load with stable, regulated, transient-free AC Power. The multi-functional LCD/LED panel displays working status, Utility Status, Fault Status, Input/Output Voltage, Frequency, Load Status and Inner Cabinet Temperature. The multi-functional LCD/LED panel displays voltage, load status and UPS status. The battery management feature constantly analyses the battery discharging status and adjusts the battery cut-off point extending the battery life.

On-line double conversion technology.

On-line double conversion technology.

Rear Panel

6kVA
10kVA

A RS232 Port

B Terminal Resistor for Parallel function

C CAN Bus Connection Port for Parallel System

D Communication slot

F Cooling Fan

G External Battery Connector

I Utility Input Breaker CB1

J Bypass Input Breaker CB2 (for Dual Input Model Only)

L Input/Output Terminal Block

N EPO (Emergency Power Off): Short to enable the function

Q Temperature compensator

Communication

The UPS is equipped with an EPO input, RS232 & USB Communication ports as standard. Serial ports provide communication with bundled UPS monitoring software. Optional interface cards : DCE (alarm relay card) R2E (second RS232 card) USE (USB card) SNMP/WEB card.

01420 82031 sales@centiel.co.uk Follow us on Twitter Sign up to our mailing list